Competitive Comparison
MDO4000C Series
Oscilloscope
InfiniiVision 4000 X-Series
Oscilloscope
| 20 M points on 4 channels, max | Record Length | 2 M points on 4 channels, max |
| On waveform data | Measurements | On displayed data |
| Dedicated hardware spectrum analyzer | Spectrum Analyzer | None. Uses gated FFT on oscilloscope input |
| 9 kHz to 6 GHz | RF Frequency Range | Max. range limited by horizontal time scale <15 GHz |
| Up to 1 GHz – 1 year warranty | Included Passive Probes | 700 MHz – 90 day warranty |
| 3.9 pF | Probe Capacitive Loading | 9.5 pF |
Accidents happen. Make sure you’re protected.
We have the only plan in the industry to offer coverage for accidental damage. Yes, this includes screen damage, spills, broken mounts, and electrostatic discharge or electronic overstress events. Reduce unplanned repair or replacement costs with our Total Protection Plan. Watch the video or click below to learn more.
Wireless Measurements – at a whole new level
Whether RF measurements make you smile or cringe, the MDO4000C oscilloscope with integrated hardware spectrum analyzer and SignalVu-PC software has you covered. Unlike oscilloscopes that offer FFT “spectrum analysis,” the MDO4000C with true spectrum analyzer provides a triggered acquisition system that is integrated across analog, digital and spectrum analyzer channels. You can perform RF measurements up to 6 GHz, and correlate events in the frequency domain with the time domain phenomena that caused them.
Industry Leading Probes – included with every purchase.
When examining the measurement signal path, probes are a key element that cannot be overlooked. When you buy an MDO4000C the industry’s best probes are included in the price. Featuring industry-best loading of 3.9 pF and bandwidth matched to your oscilloscope, the TPP-series probes will be your go-to probe for everyday use.
Accurate Measurements Matter
Put simply, the MDO Series scopes are designed to make the most accurate measurements in the industry – providing an unrivaled view into your designs. The MDO4000C takes measurements on actual acquisition data, while many other instruments only offer a snapshot view by taking measurements on display data. It doesn’t end there. We guarantee more specifications than many of our competitors, ensuring the MDO4000C will give you total confidence in your measurements. After all, measurement accuracy impacts design integrity. Why settle for anything less than precise?
More than just a powerful scope
Engineering designs today are a complex mix of processors, serial buses, and wireless interfaces. At the core of the MDO4000C is a reputable Tektronix oscilloscope paired with an expandable platform. Customize it to your testing needs. Add 16 logic channels, a 50 MHz arbitrary/function generator, protocol analysis, and an integrated true hardware 3 or 6 GHz spectrum analyzer to help tackle complex designs challenges.
Highlights
- Integrated triggered acquisition system – over 125 trigger combinations in the time AND frequency domains
- 20 Mpoint record length with Wave Inspector® controls
- True spectrum analyzer hardware enables real spectrum analysis
- Expandable functionality ensures usefulness well into the future
| Model | Analog Bandwidth | Sample Rate | Record Length | Analog Channels | Digital Channels | Spectrum Analyzer | Function Generator Output | List Price |
|---|---|---|---|---|---|---|---|---|
| MDO4024C | 200 MHz | 2.5 GS/s | 20 Mpoints | 4 | 16 (optional) | Up to 6 GHz | 1 (optional) | US $8,460 Configure & Quote |
| MDO4034C | 350 MHz | 2.5 GS/s | 20 Mpoints | 4 | 16 (optional) | Up to 6 GHz | 1 (optional) | US $13,100 Configure & Quote |
| MDO4054C | 500 MHz | 2.5 GS/s | 20 Mpoints | 4 | 16 (optional) | Up to 6 GHz | 1 (optional) | US $17,400 Configure & Quote |
| MDO4104C | 1 GHz | 2.5 – 5 GS/s | 20 Mpoints | 4 | 16 (optional) | Up to 6 GHz | 1 (optional) | US $21,300 Configure & Quote |
| Tektronix MDO4000C |
Tektronix MDO3000 |
Keysight 4000 X-Series |
LeCroy HDO4000 |
R&S RTE1000 Series |
R&S RTM2000 Series |
|
|---|---|---|---|---|---|---|
| Bandwidth | 200 MHz to 1 GHz | 100 MHz to 1 GHz | 200 MHz to 1.5 GHz | 200 MHz to 1 GHz | 200 MHz to 1 GHz | 200 MHz to 1 GHz |
| Upgradeable Bandwidth | Yes | Yes | Yes | — | — | Yes |
| Analog Channels | 4 | 2 or 4 | 2 or 4 | 2 or 4 | 2 or 4 | 2 or 4 |
| Analog Sample Rate | Up to 5 GS/s | Up to 5 GS/s | Up to 5 GS/s | Up to 2.5 GS/s | Up to 5 GS/s | Up to 5 GS/s |
| Standard Record Length (All Channels) | 20 M | 10 M | 2 M | 12.5 M | 10 M | 10 M |
| Integrated Arbitrary/Function Generator | 50 MHz (opt) | 50 MHz (opt) | 20 MHz (opt) | — | — | — |
| Integrated Logic Channels (MSO) | 16 (opt) | 16 (opt) | 16 (opt) | 16 (opt) | 16 (opt) | 16 (opt) |
| Integrated Hardware Spectrum Analyzer | Up to 6 GHz (opt) | Up to 3 GHz (opt) | — | — | — | — |
| Full Synchronization of Analog, Digital and RF | Yes | — | — | — | — | — |
| Standard Probes | Up to 1 GHz Passive | Up to 1 GHz Passive | Up to 700 MHz Passive | Up to 500 MHz Passive | Up to 500 MHz Passive | Up to 500 MHz Passive |
| Standard Warranty | 3 years | 3 years | 3 years | 3 years | 3 years | 3 years |
Automotive Buses – CAN/CAN FD Trigger, Decode & Analysis
The technical requirements of today’s automobiles require more sophisticated and sensitive electronic components and systems than ever. With six instruments in one, the Tektronix MDO4000C was developed to help meet the challenges for testing and verification of these advanced technologies. Now a single instrument can be used for:
- Debugging & verifying CAN FD, CAN, LIN and FlexRay
- High power testing for hybrid/electric vehicles
- Verifying in-car wireless systems
- New component eval (MEMS sensors, LED drivers, LEDs
Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC)
When performing design EMI/EMC testing, there is always risk it will fail; leading to schedule and budget issues. The MDO4000C with built-in spectrum analyzer, and time correlation of analog, digital and RF signals enables you to perform pre-compliance testing in your lab – greatly improving the probability of a successful first pass of full EMI compliance testing.
Power Measurements and Analysis
The quest for ever-higher energy efficiency is placing new demands on designers and test instruments alike. Standby power constraints, higher switching speeds and signal ranges, lower-leakage semiconductor devices are pushing test conditions to new extremes. The MDO4000C offers power test solutions to address these ever evolving requirements.
Highlights
- Power loss measurement at switching device
- Measurement and analysis of ripple and noise
- Characterization of power semiconductor devices
- Debugging active power factor correction circuits
Embedded Serial Bus Trigger, Decode and Analysis
A single serial bus signal often includes address, control, data, and clock information; making isolating events of interest difficult. The serial application modules for the MDO4000C series transform the oscilloscope into a robust tool for debugging serial buses with automatic trigger, decode, and search.
Highlights
- I2C, SPI, RS-232 / 422 / 485 / UART
- CAN/CAN FD, LIN, FlexRay
- I2S/LJ/RJ/TDM
- MIL-STD-1553 , USB, Ethernet
| Datasheet Link | Probe | Description | Configure and Quote |
|---|---|---|---|
| View Datasheet | TCP0020 | Probe, AC/DC Current; 20 Amp; 50 MHz BW; TekVPI Interface; Certificate of Traceable Calibration Standard | Configure & Quote |
| View Datasheet | TCP0030A | Probe, AC/DC Current; 30 Amp DC, DC TO 120 MHZ; with TekVPI Interface; Certificate of Traceable Calibration Standard | Configure & Quote |
| View Datasheet | TCP0150 | Current Probe: 20 MHz, 5 mA to 212 A, AC/DC, TekVPI | Configure & Quote |
| Datasheet Link | Probe | Description | Configure and Quote |
|---|---|---|---|
| View Datasheet | TDP0500 | Differential Probe: 500 MHz, 5X/50X, +/- 42V, TekVPI | Configure & Quote |
| View Datasheet | TDP1000 | Differential Probe: 1 GHz, 5X/50X, +/- 42V, TekVPI | Configure & Quote |
| View Datasheet | THDP0100 | Differential PROBE; 100 MHZ TekVPI DIFFERENTIAL HIGH VOLTAGE PROBE | Configure & Quote |
| View Datasheet | THDP0200 | Differential PROBE; 200 MHZ TekVPI DIFFERENTIAL HIGH VOLTAGE PROBE | Configure & Quote |
| View Datasheet | TMDP0200 | Differential PROBE; 200 MHZ TekVPI DIFFERENTIAL MEDIUM VOLTAGE PROBE;TMPD0200 | Configure & Quote |
| Datasheet Link | Probe | Description | Configure and Quote |
|---|---|---|---|
| View Datasheet | TPP0850 | High Voltage Probe: 800 MHz, 50X, 2.5 kV, Single-ended, TekVPI | Configure & Quote |
| Datasheet Link | Probe | Description | Configure and Quote |
|---|---|---|---|
| View Datasheet | TIVH02 | IsoVu optically isolated differential probe, 200 MHz, TekVPI, 3 m cable, includes 50X(MMCX50X) and 500X(SQPIN500X) tips | Configure & Quote |
| View Datasheet | TIVH02L | IsoVu optically isolated differential probe, 200 MHz, TekVPI, 10 m cable, includes 50X(MMCX50X) and 500X(SQPIN500X) tips | Configure & Quote |
| View Datasheet | TIVH05 | IsoVu optically isolated differential probe, 500 MHz, TekVPI, 3 m cable, includes 50X(MMCX50X) and 500X(SQPIN500X) tips | Configure & Quote |
| View Datasheet | TIVH05L | IsoVu optically isolated differential probe, 500 MHz, TekVPI, 10 m cable, includes 50X(MMCX50X) and 500X(SQPIN500X) tips | Configure & Quote |
| View Datasheet | TIVH08 | IsoVu optically isolated differential probe, 800 MHz, TekVPI, 3 m cable, includes 50X(MMCX50X) and 500X(SQPIN500X) tips | Configure & Quote |
| View Datasheet | TIVH08L | IsoVu optically isolated differential probe, 800 MHz, TekVPI, 10 m cable, includes 50X(MMCX50X) and 500X(SQPIN500X) tips | Configure & Quote |
| View Datasheet | TIVM1 | IsoVu optically isolated differential probe, 1 GHz, TekVPI, 3 m cable, includes 5X(IVTIP5X) and 25X(IVTIP25X) tips | Configure & Quote |
| View Datasheet | TIVM1L | IsoVu optically isolated differential probe, 1 GHz, TekVPI, 10 m cable, includes 5X(IVTIP5X) and 25X(IVTIP25X) tips | Configure & Quote |
| Datasheet Link | Probe | Description | Configure and Quote |
|---|---|---|---|
| View Datasheet | TAP1500 | Active Probe: 1.5 GHz, 10X, Single-ended, TekVPI | Configure & Quote |
| Datasheet Link | Probe | Description | Configure and Quote |
|---|---|---|---|
| View Datasheet | TPP0502 | Passive Probe: 500 MHz, 2X, TekVPI | Configure & Quote |
| View Datasheet | TPP1000 | Passive Probe: 1 GHz, 10X, TekVPI | Configure & Quote |
| Datasheet | Datasheet | Accessory |
|---|---|---|
| 119414600 | PROBE SET; RF MEASUREMENT,NEAR FIELD PROBE SET,PASSIVE,HAND HELD | |
| 119660900 | ANTENNA; RUBBER COVERED,W/BNC CONNECTOR,KD4 VHF,UNTUNED,RUBBER CAP GLUED ON | |
| HCTEK54 | Hard Carrying Case | |
| RMD5000 | Rackmount Kit | |
| Description Datasheet | TPA-N-PRE | External Preamp., TPA Connector, SMA input |
| TPA-N-VPI | Probe adapter from Type-N connector to TekVPI |
| Data Sheet | Software Package / Software Option | Description | Configure and Quote |
|---|---|---|---|
| View Datasheet | DPO4AERO | Application Module: Aerospace Serial Triggering and Analysis (MIL-STD 1553, ARINC429) | Contact Us |
| View Datasheet | DPO4AUDIO | Application Module: Audio Serial Triggering and Analysis (I2S, LJ, RJ, TDM) | Contact Us |
| View Datasheet | DPO4AUTO | Application Module; Automotive Serial triggering, Decoding and Analysis (CAN, CAN FD, LIN) | Contact Us |
| View Datasheet | DPO4AUTOMAX | Application Module: Extended Automotive Serial Triggering, Decoding and Analysis (CAN, CAN FD, LIN, FlexRay) | Contact Us |
| DPO4BND | Application Module; Bundle module for MDO/MSO/DPO4000B and MDO4000 Series (Includes DPO4AERO, DPO4AUDIO,DPO4AUTO,DPO4COMP,DPO4EMBD,DPO4ENET,DPO4LMT,DPO4PWR,DPO4USB,DPO4VID) | Contact Us | |
| View Datasheet | DPO4COMP | Application Module: Computer Serial Triggering and Analysis (RS-232/422/485/UART) | Contact Us |
| View Datasheet | DPO4EMBD | Application Module: Embedded Serial Triggering and Analysis (I2C, SPI) | Contact Us |
| View Datasheet | DPO4ENET | Application Module: Ethernet Serial Triggering and Analysis (10BASE-T, 100BASE-TX) | Contact Us |
| View Datasheet | DPO4LMT | Application Module: Limit and Mask Testing | Contact Us |
| View Datasheet | DPO4PWR | Application Module: Power Measurement and Analysis | Contact Us |
| View Datasheet | DPO4USB | Application Module: USB Serial Triggering and Analysis (USB2.0 LS, HS, FS) | Contact Us |
| DPO4VID | Application Module: HDTV and Custom Video Triggering | Contact Us | |
| MDO4TRIG | Advanced RF Triggering Application Module – Width, Runt, Timeout, and Logic triggers on the RF input of the MDO4000 Series | Contact Us | |
| TekScope Anywhere | An offline waveform analysis tool that unchains your data from your scope and adds additional measurement capability. | Contact Us |
Reviews
There are no reviews yet.